How To Build Your Own Terrarium Grow Light Using LED Strip Lights Apr02

How To Build Your Own Terrarium Grow Light Using LED Strip Lights...

As both amateur and professional plant enthusiasts have discovered, energy-efficient LEDs are highly effective in virtually any grow light application. The benefits are immediately apparent: LED lights are long-lasting, use very little energy, and will not produce plant-wilting excess heat. As a result, many are installing LEDs in terrariums and other indoor garden applications. One of our customers did just that using UltraBright™ strip lights from Flexfire LEDs, and we asked him to share his experience in order to create a simple tutorial. Follow these steps and learn how to build your own terrarium grow light using LED strip lights. First, a combination of Flexfire LEDs 12v Design Series and 24v Architectural Series UltraBright™ strip lights were mounted onto aluminum bars and channels. This allows custom configuration, and the aluminum acts as a heat sink for the LEDs, helping them perform better and last longer. These aluminum bars are inexpensive and easy to find at any home improvement store. Adhesive pads were attached to the end of each bar; these pads rest on the rim of the terrarium. The power connection was soldered to the LED strip light, and a nylon tie was used to secure the power cables and protect the solder joints from any jarring movement. Finally, a blob of silicone was applied to insulate the solder points.           The above process was repeated for the aluminum channels, also easily available at any home improvement store.    Below left, a smaller aluminum channel was bolted onto two sides of the terrarium. Right, a view from below showing all the illuminated channels.    Below left is a view from above one of the bars, which was painted black. The lights are on the underside, directed down at the plants. Also, a close-up...